PressurePro is a wireless electronic tire pressure monitoring system designed to notify the driver of low tire pressures. 

The PressurePro System consists of two basic components:  Tire Sensors and a Monitor.  The sensors which replace the caps on your valve stems transmit a coded radio frequency (RF) signal to the monitor whenever a low tire pressure condition exists.

Many tire pressure monitoring systems require that you install the sensoring device inside the tire.  With PressurePro, you DO NOT have this additional cost of installation.  The PressurePro system can be installed in minutes.  In less time than it would take to break down one tire and install a traditional unit, you can install the entire PressurePro System.

************************************************************

The only vehicle that does not benefit from using PressurePro.

************************************************************

The weight of the PressurePro sensor is such that it normally DOES NOT require the re-balancing of the tire.  

No tools are necessary to install the PressurePro system!  The system is also simple to operate. A wireless tire pressure sensor simply screws onto the valve stem replacing the dust cap. The Monitor is powered by plugging it into the 12V/DC outlet.  When activated, it will display the current tire pressure as well as notify the driver of a low tire pressure both visually and audibly. The sensors constantly 'read' the tire pressure and transmit tire-pressure readings to the monitor.  When tire pressure is low, the monitor identifies the low tire position with a flashing light and an audible sound to notify the operator.